Conductive-Rollers Description
|
for LBP
|
|
| CHARGE-ROLLERS Material : Liquid silicone Hardness (after coating) : 40~45?(JIS A Scale) Surface roughness : Rz≤10?/i>m Surface treatment : Polyurethane Coating Electric Resistance between metal shaft and surface of the rubber under - 500VDC and 1kgf pressure as rotating should satisfy following condition, 7 X E05 ohms≤ R at NN≤5 X E06 ohms (22? X 55% RH) Adhesion Strength between the shaft and the rubber should be more than 5kgf.com of twisting. DEVELOPE-ROLLERS Material : Compound Rubber (Conductive Rubber) Hardness (after coating) : 40~45?(JIS A Scale) Surface roughness : Rz≤3?/i>m Surface treatment : Polyurethane Coating or uvfinishingElectric Resistance between metal shaft and surface of the rubber under - 500VDC and 1kgf pressure as rotating should satisfy following condition 1 X E08 Ohms (22?C X 55% RH) PRESSURE-ROLLER Material : Liquid silicon Hardness (after coating) : 20~30?(JIS A Scale) Manufacture Method 1. Teflon Coating Type 2. Teflon Tubing Type 3. Operation Temperature : 180~210? 4. Adhesion strength between the shaft and the rubber should be more than 5kgf.com of twisting. |
Printable Conductive-Rollers, Imprinted,
Branded Conductive-RollersPrinting, Printed Conductive-Rollers
A | B | C | D | E | F | G | H | I | J | K | L | M |N | O | P | Q | R | S | T | U | V | W | X | Y | Z | All | Search by Alphabet
A | B | C | D | E | F | G | H | I | J | K | L | M |N | O | P | Q | R | S | T | U | V | W | X | Y | Z | All | Search by Alphabet
