Dry Type Measuring Water Meter (Nominal Diameter 40 60mm) Description

Product Features
These dry type measuring meters employ the inferential principle of design which uses the velocity of vane wheel type onto a rotor within a meter casing specifically designed to measure the exact flow.The rotor movement is converted into a specific volume through the meter register.
Meters are available with dry and super-dry registers to meet the customer`s needs. All dry meters can be equipped with pulse output device for remote reading and dry management systems. Meters are available in size from 40mm to 50mm and meet ISO 9002. An error is stabilized even in the broad flow range as the internal seat structure is in the vane wheel multi-jet & remote type. a special material is used for friction element no attrition is made, the sensitivity is sharp and durability is outstanding. The reading is easy from any direction since
flow indicator element is possible for rotation of 360 °.
The dial is always clear as no moisture gets steamed up the indicator element.
Elements are possible for installation of remote indicator element at your order which the gear speed reduction ratio is in 2 step system and the magnetic slip was used for the first time.

Specifications
Dry Type Measuring Water Meter (40 - 50mm)

Performance (Measuring section)
Nominal Diameter : 40, 50
Nominal Flow Rate Qn(m³/h) : 10, 15
Maximum Flow Rate Qmax(m³/h) : 15, 25
Minimum Flow Rate Qmin (l/h) : 200, 300
Transitional Flow Rate Qt(l/h) : 800, 1200
Operational Characteristics
Starting Flow Rate Qs(l/h) : 70, 120
Counter Unit Maximum(m³) : 99,999 99,999
Counter Unit Minimum(m³) : 0.001, 0.001
Working Pressure (Bar) : 10, 10
Registration Dial : 5, 5
Head and Body Material : BsC, BsC
Measurement Element(m³/h) : 0.2 - 10, 0.3 - 15

Continuous development of our products may necessitate change in details without prior notion.
Definitions
Maximum Flow Rate. Qmax : The highest flow rate at which the meter is required to operate in a safisfactory manner for a short period of time without deteriorating.
Nominal Flow Rate. Qn(m³/h): Half the maximum flow rate (Qmax).
Minimum Flow Rate. Qmin : The lowest flow rate at which the meter is required to give indications which the maximum permissible error folerance.
It is determine in terms of Qn.
Transitional Flow Rate. Qt : The Flow rate at whichthe maximum permissible error of the water meter change.

Dry Type Measuring Water Meter (Nominal Diameter 40 60mm) Related Resource

A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

Dry Type Measuring Water Meter (Nominal Diameter 40 60mm) Related Products

---