Series of submersible pumps Description
Flow rate up to 200 l/min (12m 3 /h)
Dynamic head up to 11m
OPERATING LIMITS
Maximum operating depth 2m below water level
Maximum fluid temperature+400C
Maximum passage for suspended solids 10mm
Maximum emptying level 9mm form the bottom
STRUCTURAL CHARACTERISTICS
stainless steel DELIVERY BODY
stainless steel BASE
Technopolymer open impeller
EXTERNAL FLOAT SWITCH for automatic pump operation
Stainless steel MOTOR SHAFT
Carbon/alumina MECHANICAL SEAL.
Sealed induction MOTOR designed for continuous duty.
The thermal cutout relay (motor protector) is incorporated.
INSULATION class B
Neoprene submerged SUPPLY CABLE. Supplied standard with 5 metres of cable and plug (10 meters on request).
CONSTRUCTION AND SAFETY STANDARDS in compliance with IEC.
Printable Series of submersible pumps, Imprinted,
Branded Series of submersible pumpsPrinting, Printed Series of submersible pumps
A | B | C | D | E | F | G | H | I | J | K | L | M |N | O | P | Q | R | S | T | U | V | W | X | Y | Z | All | Search by Alphabet
A | B | C | D | E | F | G | H | I | J | K | L | M |N | O | P | Q | R | S | T | U | V | W | X | Y | Z | All | Search by Alphabet


