Series of Jet pumps Description
PERFORMANCE RANGE JET
Flow rate up to 60 l/min
Dynamic head up to 47 m
OPERATING LIMITS
Suction lift up to 9 m
Fluid temperature up to +40 °C
Maximum ambient temperature +40 °C
A new and improved self-priming
pump design, increased hydraulic
efficiency, to current standards
STRUCTURAL CHARACTERISTIC
Cast iron PUMP BODY
Stainless steel PUMP BODY COVER serving also as mechanical seal housing.
Techno polymer EJECTOR UNIT (approved for drinking water) centrifugals
Centrifugal radial flow IMPELLER in BRASS or techno polymer (approved for drinking water) on
request.
Ceramic and graphite MECHANICAL SEAL.
MOTOR: the pumps are coupled directly to an asynchronous, high efficient TOP induction motor
of suitable size, which is quiet running, closed and externally ventilated, suitable for
continuous duty. INSULATION class B. The thermal cutout relay (motor protector) is
incorporated in all single phase motors. Three phase motors require an adequate external
motor protector, with connection according to current standards.
PROTECTION IP 44
CONSTRUCTION AND SAFELY STANDARDS in compliance with IEC.
WARRANTY: 1YEAR (according to our general sales conditions)
Printable Series of Jet pumps, Imprinted,
Branded Series of Jet pumpsPrinting, Printed Series of Jet pumps
A | B | C | D | E | F | G | H | I | J | K | L | M |N | O | P | Q | R | S | T | U | V | W | X | Y | Z | All | Search by Alphabet
A | B | C | D | E | F | G | H | I | J | K | L | M |N | O | P | Q | R | S | T | U | V | W | X | Y | Z | All | Search by Alphabet


