Slotting Unit Description
- Motorized yoked creaser slotter
- Glue Lap crush device
- Single Slotting Unit
- Motorized lateral setting of the slotting and creasing heads by push button
- Automatic positioning of the slotter heads
- Automatic return to Zero Position
- Pneumatic locking of the Unit
- Standard Knives Thickness is 8mm(5/16")
- All Shafts are ground and chrome plated
- All glue tab cutting tools and anvil are tempered steel
- Unit braking when machine is open
- The slotter heads move from the previous order position to the desired
position directly in order to minimize set up time.
- Slotting heads are centered with the ability to be offset and varied by
shimming
- All slotter heads are two pieces
- Glue lap crush device
- Slotting knife configuration by customer
Printable Slotting Unit, Imprinted,
Branded Slotting UnitPrinting, Printed Slotting Unit
A | B | C | D | E | F | G | H | I | J | K | L | M |N | O | P | Q | R | S | T | U | V | W | X | Y | Z | All | Search by Alphabet
A | B | C | D | E | F | G | H | I | J | K | L | M |N | O | P | Q | R | S | T | U | V | W | X | Y | Z | All | Search by Alphabet


