Freon Flake Ice Making System Description

Product Name: FF-E Series Freon Flake Ice Making Systems Model Number: FF-E Series Place of Origin: China First Class Product Analysis The operating systems of FF-E series use advanced computers to automatically control and reveal the whole ice making process which makes for easy and convenient operation. The machine will be running smoothly, hard to break and obviously it is very low maintenance as well. The indication can be showed on the PC board if there something goes wrong then the machine will be turned of itself and the instruction warning lights will be on. Such as: 1. Ice Full 2. Lack of Water 3. Wrong Rotating Direction 4. Evap/Cond Temperature Too High 5. High and Low Pressure Alarm etc. So it will make your life absolutely easier to judge the failure of operation. By using reliable and big diameter water spray device can avoid reducing daily output of ice due to the contaminant from the water blocked the device. The design of stationary and vertical evaporator is innovated in order to avoid the leaking problem form the refrigeration system due to the wear and tear in between the seal and shaft of a rolling operation on horizontal drum. So our products will last a lot longer and it is unlikely to have the leaking problem. It is great idea to rotate the blade instead of drum, it will reduce the resistance of movement tremendously, save a lot of energy, decrease the noise, get rid of the ice powder and so forth. Using high quality, low temperature alloy steel and reasonable pipeline design of evaporator can not only improve the refrigeration efficiency, but also cut the cost of running, meanwhile it will save you a great deal compare to the other products. Because of the stationery evaporator while the ice blade and the main shaft rotating synchronously, so the ice layer in between the blade and the inner suffice of the evaporator rely on the friction to rotate themselves and then break the ice as pieces to drop to the outlet. (The helix ice blade is rotating while the evaporator stationary). So it will greatly lower the demanding of the power from the motor and gear box, that's why you will have the economical energy consumption.