TOM Ophthalmic Instrument Table

Products Name:	TOM Ophthalmic Instrument Table
Item No:	259512
Update time:	2005-6-8 22:00:00
Enquiry Now:

TOM Ophthalmic Instrument Table Description

Operation Instruction

1. Installation
There are two steel bars with wheels to be assembled respectively to both sides of the base.Use wrench to remove a M10 screw with spring washer from one side of the base.Then align two holes in one bar with the screw heads in the side of the base and screw the previous removed M10 screw.
Assemble another bar in the same way.After making sure the instrument table is evenly placed,re-tighten two M10 screws.
2. Input Voltage
110V/220V~
3. Electrical Outlets
There is one or two outlet provided.
CAUTION:
The maximum current drawn must not exceed 6 amp.
4. Fuse Replacement
To replace a fuse ,disconnect the power cord from the input outlet and then remove the cover of the fuse holder,which will expose the fuse .After determining and correcting  the cause of the fuse blowing,insert a new fuse and screw the cover back into postion. Reconnect the power  cord and then check the operation of the table.
Fuse Capacity:5A
5. Accessories
Hexagon Wrench    1
Fuse                        2

6. Note:
Check the setting on the voltage selector located on the side of the base.
Ensure the local voltage corresponds to the input voltage.

Printable TOM Ophthalmic Instrument Table, Imprinted, Branded TOM Ophthalmic Instrument TablePrinting, Printed TOM Ophthalmic Instrument Table
A | B | C | D | E | F | G | H | I | J | K | L | M |N | O | P | Q | R | S | T | U | V | W | X | Y | Z | All | Search by Alphabet