CCTV LCD control keyboard

CCTV LCD control keyboard Description

PE5123 serial versatile control keyboard is LCD control keyboard, which can put on work- table or rack, convenient to control by operator. Lots of keyboard could be in the system, every keyboard with different authority, keyboard can not carry out relative operation of monitor, camera & decoders without authority, so that the system would not be operated by unconcerned user & department.
PE5123 acts as sub keyboard of PE60, and act as not only main keyboard but also sub keyboard of PE40, PE50 and PE50M.
To login in PE60 master matrix, user must login in user name and password, user name from 1 to 64, for example, if user inputs user1, corresponding password is 12345. also PE50 requires password, no password, when login PE40. After login successful, the operation interface will display, then user can operate.
When control PE40, PE50 and PE50M, PE5123 with 1-16 user names, and with 1-64 user names when control PE60.
ID of keyboard is of soft ID, ID of PE40,50, 50M is from 1 to 16, and ID of PE60 is from 1 to 60.
PE5123 can control PE40, PE50, PE50M and PE60 matrix.
PE5123 has two kinds of communication mode: RS485 and RS422

Function:
1.LCD display
Input number, camera number transferred and monitor information, etc. would display on LCD;
2.Camera/monitor choose
PE5123 can switch up to 9999 camera image to any monitor.
3.Pan/tilt control
The user can control pan/tilt by joystick flexibly
4.Electrified lens control
PE5123 can control electrified lens, include: iris (open-close), focus (near-far), change focus (wide-tele)
5.Alarm control
User can arm/disarm by PE5123
6.niversal switch (tour switch)
Which means any salvo switch of camera. system can program and save sixty-four salvos tour switch sequences, every sequence has sixty-four camera images and every interval time of image is adjustable. every camera signal maybe preset image of camera. in every tour switch, the same camera scene or many preset images can display many times.
Camera image skipping/adding
Image skipping: to skip the unnecessary display image while running and masking these image on the monitor automatically.
Image adding: to add the image to display automatically while running and display on the monitor.
7.Switch forward/back
To switch forward or back camera image step by step in grouping condition of any monitor
8.Multiplex control
User can control all functions of ROBOT multiplex by PE5139 multiplex or DVR adaptor.
9.User password
Which is a safety measure. To ensure user with authority to operate, the operator must have a password to login. up to 64 user names and passwords.
10.Alarm response
When alarm activating, PE5123 will indicate information
11.up
Rack or worktable

CCTV LCD control keyboard Related Resource

CCTV LCD control keyboard Related Products

CCTV LC
D Display Keyboard

CCTV LC
D control keyboard