Serration peaks gasket

Products Name:	Serration peaks gasket
Item No:	233202
Update time:	2005-5-23 10:11:00
Enquiry Now:

Serration peaks gasket Description

Ret ring with concentric serrations made of various types of metal. Serration peaks gasket was used when bolting force is not sufficient to seal a flat gasket, because it contacts flange face only at serration peaks. Commonly used on valve bannets and flanges attached to equipment. 3 types of cross section as per right table are available.

Serration peaks gasket Festures:
(1) Serration peaks gasket is suitable for high temperature and high pressure application.
(2) High corrosion resistance.
(3) Constant and teliable sealing.
　 Serration peaks gasket Application
(1) Working temperature:650°C
(2) Working pressure:6.4 to 　　　　　25.0 MPa
(3) Minimum pre-tightening 　　　　　specific pressure: y=70MPa
(4) Gasket coefficient: m=4.25

Printable Serration peaks gasket, Imprinted, Branded Serration peaks gasketPrinting, Printed Serration peaks gasket
A | B | C | D | E | F | G | H | I | J | K | L | M |N | O | P | Q | R | S | T | U | V | W | X | Y | Z | All | Search by Alphabet